Scarlett 2i2

Specifications

  • 2 in / 2 out USB audio interface
  • 96 KHz, 24-bit conversion
  • 2 Focusrite microphone preamplifiers
  • Red anodised aluminium unibody chassis

Front panel

  • 2 line/mic/instrument combination inputs – high quality XLR/¼” TRS Jack Combo
  • 2 Line/Instrument switches
  • 2 Gain knobs
  • 2 Gain halo signal indicators
  • 48V Phantom power switch
  • Direct monitor switch
  • Large monitor level dial
  • USB Connection LED indicator
  • Headphone output - ¼” TRS Jack
  • Headphone level knob

Rear panel

  • 2 balanced monitor outputs – ¼” TRS Jack
  • USB 2.0 Port
  • Kensington Lock slot

Included software

  • Ableton Live Lite 
  • Focusrite Scarlett plug-in suite
Analogue Input Performance
Mic
Frequency Response 20Hz - 20kHz +/- 0.1 dB
THD+N -100dB (minimum gain, -1dBFS input with 20Hz-20kHz filter)
Equivalent Input Noise (EIN) < -127dB: measured at maximum gain with 150Ω termination (20Hz-20kHz filter)
Gain Range -4dB to +46dB
Max Input Level +4dBu
Line
Frequency Response 20Hz - 20kHz +/- 0.1dB
THD+N -91dB (measured at minimum gain with -1dBFS input and 20Hz-20kHz bandpass filter)
Noise -104 dBu (22 Hz/22KHz bandpass filter)
Signal to Noise Ratio > 100dB
Gain Range -21dB to +29dB
Max Input Level +20dBu
Instrument
Frequency Response 20Hz - 20kHz +/- 0.1dB
THD+N -72dB (measured at minimum gain with -1dBFS signal and 20Hz-20kHz bandpass filter)
Noise -87dBu (22Hz/22kHz bandpass filter)
Gain Range +4dB to +46dB
Max Input Level +4dBu
Analogue Output Performance
Nominal Output Level 0dBFS = 10dBu, balanced
Frequency Response 20Hz - 20kHz +/- 0.2dB
THD+N -100dB (measured with -1dBFS input 20Hz-20kHz filter, un-weighted)
Output Impedance < 10Ω
Power Output into 150Ω 15mW
Power Output into 50Ω

30mW

Digital Performance
Clock sources Internal clock only
A-D Dynamic Range 105dB 'A-weighted' (all inputs).  Converter chipset A-D dynamic range 114dB
D-A Dynamic Range 104dB 'A-weighted' (all outputs).  Converter chipset D-A dynamic range 114dB
Supported sample rates 44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz
Crosstalk
Input to Input Better than 90dB
Output to Output Better than 90dB
Input to Output Better than 85dB
Input Metering
Ring LED lit Green Signal present (-24 dBFS)
Ring LED lit Red Signal overload (0dBFS), peak held for approximately 1 second
Weight and Dimensions
Height 45 mm / 1 ¾ “
Width 175 mm / 7”
Depth 100 mm / 4”
Weight 580 g / 1.3 lbs