iTrack Studio

Specifications

iTrack Studio HP60S Headphones

Reference quality headphones
Extended frequency response
Adjustable fit
Closed back design to prevent audio spill when recording
Mini-jack to 1/4" jack adapter included

iTrack Studio CM25S microphone

Large-diaphragm condenser microphone
3 m red cable included
Mic stand adaptor

iTrack Solo audio interface

2 in / 2 out USB audio interface
96 KHz, 24-bit conversion
1 Focusrite microphone preamplifier
Silver "soft-touch" aluminium unibody chassis

Front panel

  • 1 microphone input – XLR
  • 1 Instrument input – ¼' unbalanced
  • 2 Gain knobs
  • 2 Gain halo signal indicators
  • 48V Phantom power switch
  • Direct monitor switch
  • Large monitor level dial (controls headphone and line level outputs)
  • USB Connection LED indicator
  • Headphone output - ¼" TRS Jack

Rear panel

  • 2 unbalanced monitor outputs – RCA Phono
  • DEVICE LINK port (to connect iTrack Solo to iPad)
  • USB 2.0 Port
  • Kensington Lock slot

Included software

  • Ableton Live Lite 8 – professional music making software to use your iTrack Solo with a Mac or PC.
  • Focusrite Scarlett plug-in suite – collection of software plug-ins bringing effects to your music software (like Ableton Live for example).

 

Analogue Input Performance
Mic
Frequency Response20Hz - 20kHz +/- 0.2 dB
THD+N< 0.002% (minimum gain, -1dBFS input with 22Hz/22kHz bandpass filter)
Equivalent Input Noise (EIN)< -120dB: measured at minimum gain with, -1 dBFS (20Hz/22kHz bandpass filter)
Gain Range+10dB to +55dB
Max Input Level-3dBu
Instrument
Frequency Response20Hz - 20kHz +/- 0.2dB
THD+N0.003% (measured with -1dBFS input and 22Hz/22kHz bandpass filter)
Noise-87dBu (22Hz/22kHz bandpass filter)
Gain Range-10dB to +55dB
Max Input Level-3dBu
Analogue Output Performance
Nominal Output Level0dBFS = +9dBu, unbalanced
Frequency Response20Hz - 20kHz +/- 0.2dB
Noise-87dBu (22Hz/22kHz bandpass filter)
Gain Range+10dB to +55dB
Max Input Level-3dBu
Analogue Output Performance
Nominal Output Level0dBFS = 10dBu, balanced
Frequency Response20Hz - 20kHz +/- 0.2dB
THD+N< 0.001% (measured with 0dBFS input 22Hz/22kHz bandpass filter, un-weighted)
Digital Performance
Clock sourcesInternal clock only
A-D Dynamic Range105dB 'A-weighted' (all inputs).  Converter chipset A-D dynamic range 114dB
D-A Dynamic Range105dB 'A-weighted' (all outputs).  Converter chipset D-A dynamic range 114dB
Supported sample rates44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz – Mac and PC
44.1 KHz, 48 KHz – iPad
Crosstalk
Input to InputBetter than 90dB
Output to OutputBetter than 90dB
Input to OutputBetter than 85dB
Input Metering
Ring LED lit GreenSignal present (-24 dBFS)
Ring LED lit RedSignal overload (0dBFS), peak held for approximately 1 second
Weight and Dimensions
Height45 mm / 1 ¾ "
Width150 mm / 6"
Depth100 mm / 4"
Weight500 g / 1 lb