Dream Big with Focusrite - Win a dream recording weekend at Air Studios. Click here to enter

Saffire 6 USB

Saffire 6 USB Header Image

Articles

It possible for the Saffire 6 usb to bluescreen a Windows 7 or 8 pc when it is either connected or disconnect with the computer on. This is normally caused by the usb chipset drivers on the computer...
If you are having trouble with installing Plug Ins on a Mac please see this video . To get your Scarlett Plug Ins (or any other Focusrite or Novation Plug Ins) installed properly on your Windows...
Many new users become confused when they start recording and find that their Vocal or other signal from one microphone is placed only on the left in their headphones or speakers. The common question...
Line inputs on Focusrite interfaces, both standard and combi, go through a small section of the preamp circuit. Due to the transparent nature of our preamps, however, this does not colour the signal...
Many of our Setup Guides show you the preference menu of your DAW Software with a drop down menu that features the interface's name, Scarlett, Saffire, Forte, etc. On Mac the DAW will read the name...
If you are finding that multiple reboots (usually at least 3) cause your Saffire 6 USB to stop passing audio then you may need to disconnect and reconnect the audio device to get it to pass audio...
As you lower the buffer size, this adds greater strain on your computer's CPU and it will eventually fail to pass audio. To improve the performance of your computer, you should work through the...
If you are experiencing any power issues with the 6 USB when connected directly to a Windows PC you should follow the steps below: 1. Click Start, Open Control Panel and click on Device Manager. 2...
My Saffire won't connect to my computer - the USB light does not light - Please ensure that you have the latest driver installed for your Saffire 6 USB before connecting it. The latest driver is...
If you want to use the 2 pairs of RCA outputs simultaneously, for example to plug into a DJ Mixer, you need to set the monitor gain knob to its maximum in order to match the output levels. This is...